Sold Out
The GloWear 8261FRHL Hi-Vis FR Class 2 Safety Vest is dual FR-compliant to NFPA 2112 and NFPA 70E for protection against flash fire and arc flash hazards. Designed to be worn as part of a complete FR garment system, it is tested and certified to an ATPV 6.6 cal/cm2. Flame-resistant...
Sold Out
The GloWear 8262FRZ Class 2 FR Surveyor Zipper Vest is FR compliant to NFPA 70E for protection against arc flash hazards. The unique combination of solid front and mesh back makes this flame-resistant safety vest first-of-its-kind in storage and breathability. Designed to be worn as part of a complete fire-resistant...
Sold Out
Glowear 8911 Hi-Vis Pants offer breathable and lightweight protection. A comfortable elastic waistband means these work pants can be worn alone or over a base layer. The pant legs have hook & loop openings to easily fit over boots. High visibility polyester fabric and 2" reflective tape set on a...
Sold Out
The GloWear 8248Z Class 2 Surveyors Vest has a solid front, mesh back and zipper closure. Two-tone design. Lots of pockets, two inside and four outside pockets. What's not to love? Features 2 ANSI-compliant reflective. Reflective is set on 3.5 contrasting background. Dual radio mic tabs.Note: This is a non-returnable...
Sold Out
The GloWear 8210HL Mesh Hi-Vis Safety Vest is a ANSI 107 Type R, Class 2 compliant economy vest made of 3.3 oz polyester mesh. This hi-vis vest features 2 reflective tape, a lower interior pocket, an exterior pocket and a single mic tab. A hook and loop closure makes for...
Sold Out
ANSI-compliant, two-tone public saftey vest with a breakaway design. Solid poly front with mesh back. Reflective strip set on 4.5 contrasting background for extra visibility. Features one multi-division inside pocket and dual radio mic tabs.Note: This is a non-returnable item.
Sold Out
The GloWear 8205HL-ECO Recycled Hi-Vis Vest is a Type R, Class 2 vest that meets ANSI/ISEA 107-2020 visibility requirements and is made of recycled polyester mesh. This post-consumer recycled hi-vis vest features 2" reflective tape for enhanced low-light visibility and a hook and loop closure for easy on and off....
Sold Out
The Chill-Its 8935CT Hi-Vis Sun Hat is a lightweight and breathable sun protection hat with advanced PVA cooling technology lining the rim for relief in extreme heat. This 150D polyester sun hat features a wide brim for complete face and head coverage, while 360-degree mesh venting maximizes airflow for breathable...
Sold Out
The GloWear 8256Z Class 2 Self-Extinguishing Safety Vest is built with durable, yet breathable ANSI/ISEA compliant self-extinguishing treated polyester mesh to prevent after-flame while providing maximum visibility for any job, both day and night. This hi-vis safety vest has a total of two strategically placed pockets, an open top pocket...
Sold Out
The Chill-Its 8935MF Hi-Vis Sun Hat is a lightweight and breathable sun protection hat with advanced microfiber cooling technology lining the rim for relief in extreme heat. This 150D polyester sun hat is rated to UPF 50+ and features a wide brim for complete face and head coverage, while 360-degree...
Sold Out
Class 3 standard vest constructed of mesh fabric. Features zipper closure and 2 ANSI-compliant reflective. One inside and two outside pockets for keeping important items close at hand. Single radio mic tab.Note: This is a non-returnable item.
Sold Out
Class 3 standard vest constructed of mesh fabric. Features zipper closure and 2 ANSI-compliant reflective. One inside and two outside pockets for keeping important items close at hand. Single radio mic tab.Note: This is a non-returnable item.
Sold Out
Class 3 two-tone vest is made of mesh fabric. 2 ANSI-compliant reflective set on 3.5 contrasting background for better visibility. One inside pocket for keeping important items close at hand and one radio mic tab. Zipper closure.Note: This is a non-returnable item.
Sold Out
Class 3 two-tone vest is made of mesh fabric. 2 ANSI-compliant reflective set on 3.5 contrasting background for better visibility. One inside pocket for keeping important items close at hand and one radio mic tab. Zipper closure.Note: This is a non-returnable item.
Sold Out
The GloWear 8356FRHL Hi-Vis FR Safety Vest is a Type R Class 3 vest compliant to ASTM F1506 for flame resistance. Designed to be worn as part of a complete flame-resistant garment system, this ANSI-compliant mesh work vest is tested and certified to an ATPV 4.6 cal/cm2. This ASTM F1506...
Sold Out
The GloWear 8249Z Surveyors Vest is an ANSI 107 Type R, Class 2 economy vest with a 3.6 oz polyester solid front and breathable 3.3 oz polyester mesh back. This hi-vis vest features 2" reflective tape for enhanced low-light visibility. With two interior and two exterior pockets, including a cell...
Sold Out
The GloWear 8249Z Surveyors Vest is an ANSI 107 Type R, Class 2 economy vest with a 3.6 oz polyester solid front and breathable 3.3 oz polyester mesh back. This hi-vis vest features 2" reflective tape for enhanced low-light visibility. With two interior and two exterior pockets, including a cell...
Sold Out
The GloWear 8248Z Class 2 Surveyors Vest has a solid front, mesh back and zipper closure. Two-tone design. Lots of pockets, two inside and four outside pockets. What's not to love? Features 2 ANSI-compliant reflective. Reflective is set on 3.5 contrasting background. Dual radio mic tabs.Note: This is a non-returnable...
Sold Out
The GloWear 8246Z Mesh Two-Tone Safety Vest is an ANSI 107 Type R, Class 2 economy vest made of 3.3 oz polyester mesh. This hi-vis vest features 2" reflective tape set on a 3.5 contrasting mesh background and reflective piping for enhanced visibility. Built for storage, this vest has two...
Sold Out
The GloWear 8346Z Two-Tone Hi-Vis Class 3 Surveyor Vest is loaded with six pockets and built with durable, yet breathable ANSI/ISEA compliant polyester mesh providing maximum visibility for any job in both daylight and nighttime conditions. Two large exterior flap top pockets are on the lower-front and are designed to...
Sold Out
The GloWear 8246Z Mesh Two-Tone Safety Vest is an ANSI 107 Type R, Class 2 economy vest made of 3.3 oz polyester mesh. This hi-vis vest features 2" reflective tape set on a 3.5 contrasting mesh background and reflective piping for enhanced visibility. Built for storage, this vest has two...
Sold Out
The Chill-Its Lightweight Phase Change Cooling Vest helps to keep workers cooler, safer and more productive. Its phase change cooling material maintains a 64°F/18°C temperature for up to two hours when activated. The vest's adjustable hook and loop closures around the waist provide a customized fit for different body types....
Sold Out
The GloWear 8346Z Two-Tone Hi-Vis Class 3 Surveyor Vest is loaded with six pockets and built with durable, yet breathable ANSI/ISEA compliant polyester mesh providing maximum visibility for any job in both daylight and nighttime conditions. Two large exterior flap top pockets are on the lower-front and are designed to...
Sold Out
The GloWear 8231TV Hi-Vis Tool Tethering Safety Vest - Type R Class 2, Dual Certified provides versatile tethering and storage options for working at heights. Intended for tethering tools under 2 lbs, this safety vest is dual certified for both ANSI/ISEA 121 and ANSI/ISEA 107 compliance. Unlike other hi-vis vests...
Sold Out
Class 2 Two-Tone X-Back Vest has a CSA compliant design with D-ring access and multiple pockets. Made of lightweight 3.6 oz polyester. Features 2" ANSI-compliant 3M Scotchlite Reflective accents on a 3.5" contrasting background. One inside and four outside pockets for storage.Note: This is a non-returnable item.
Sold Out
Pockets, pockets, pockets! Class 2 Surveyors Vest with combined performance tape, solid front, mesh back and zipper closure. Two inside and four outside pockets. One large zippered rear document/tablet pocket. Dual radio mic tabs.Note: This is a non-returnable item.
Sold Out
Pockets, pockets, pockets! Class 2 Surveyors Vest with solid front, mesh back and zipper closure. Two inside and four outside pockets. One large zippered rear document/tablet pocket. Features 2 ANSI-compliant 3M Scotchlite Reflective. Dual radio mic tabs.Note: This is a non-returnable item.
Sold Out
Pockets, pockets, pockets! Class 2 Surveyors Vest with solid front, mesh back and zipper closure. Two inside and four outside pockets. One large zippered rear document/tablet pocket. Features 2 ANSI-compliant 3M Scotchlite Reflective. Dual radio mic tabs.Note: This is a non-returnable item.
Sold Out
The GloWear 8260FRHL Hi-Vis FR Safety Vest is a Type R Class 2 vest compliant to ASTM F1506 for flame resistance. Designed to be worn as part of a complete fire-resistant (FR) garment system, this ANSI-compliant mesh work vest is tested and certified to an ATPV 4.6 cal/cm2. This ASTM...
Sold Out
Class 2 Heavy-Duty Surveyors Vest offers serious visibility for serious professionals. Rugged materials and storage galore, this is your new favorite vest. Heavy-duty #10 zipper closure. 2 ANSI-compliant 3M Scotchlite Reflective. Reflective set on 3.5 contrasting background. Four outside pockets and one large zippered rear document/tablet pocket. Dual radio mic...
